1, The specification of the product including basic size information, electrical and mechanical properties.
| Basic size information |
| Color | White |
| Pitch | 1.25mm |
| Mating lock | without |
| Material | PA66 |
| Flammability | UL94V-0 |
| Wire Insulation Diameter | 1.00mm Max. |
| Mounting side | Standard on-Board |
| Terminals material | phosphor bronze, tin-plated/gold-flash finish |
| |
| Electrical properties |
| Current Rating | 1A AC, DC |
| Voltage Rating | 150V AC, DC |
| Contact Resistance | 30mΩ Max |
| Insulation Resistance | 500mΩ min |
| Withstanding Voltage | 500V AC/minute |
| |
| Mechanical properties |
| Operating Temperatureemperature range | -25℃ to 85 ℃ |
| Other information please kindly check the following picture. |
2, Related drawing and report
3. Ratings & Applicable Wires
| Item | Standard |
| Rated Voltage (Max.) | 100V AC/DC | Insulation O.D. 1.50mm (Max.) |
| Rated Current (Max.) And Applicable Wires | AWG#24 | 2.0A AC/DC |
| AWG#26 | 1.5A AC/DC |
| AWG#28 | 1.0A AC/DC |
| AWG#30 | 0.5A AC/DC |
| Ambient Temperature Range | -25℃ ~ +85℃* |
*: Including terminal temperature rise
4. Electrical Performance
| Test Description | Procedure | Requirement |
| 4-1 | Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) | 10mΩ (Max.) |
| 4-2 | Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 1000MΩ (Min.) |
| 4-3 | Dielectric Withstanding Voltage | Mate connectors, apply 800V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. |
| 4-4 | Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. | 5mΩ (Max.) |
5. Mechanical Performance
| Test Description | Procedure | Requirement |
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7-2 |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#24 | 3.0kgf (Min) |
| AWG#26 | 2.0kgf (Min) |
| AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) |
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.00kgf (Max.) |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 1.50kgf (Min.) |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.00kgf (Min.) |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20mΩ (Max.) |
| 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 20mΩ (Max.) Discontinuity 1 μsec.(Max.) |
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
3, FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM service and allow multiple design per setup.
Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed world, delivery by Fed x/UPS/DHL is normally 3-5 days(excluding weekends).
Q: How is the goods packaged ?
A: Usually in bags, tube, pipe, plated & carton
4, Various payment & delivery way
In order to make you get product quickly and send money easily, we can offer differenct payment terms
for you.
- If the total value of order is less than USD200, please kindly choose western union or paypal.
- If the total value of order is between USD200 and USD500, please kindly choose western union.
- If the total value of order is over USD500, please kindly choose western union or TT.
- If the total value of order is over USD5000, L/C at sight will be considered by us, but the commision fee will be shared by us together.
Product Tags:
|
|
Electronics Single Row Printed Circuit Board Connectors With PA66 Material Crimp housing Images
|
